User Tools

Site Tools


en:openbsd_on_orangepi_pc2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:openbsd_on_orangepi_pc2 [2018/02/02 15:08]
gman999
en:openbsd_on_orangepi_pc2 [2018/02/02 20:35]
gman999
Line 9: Line 9:
    * an OpenBSD box to build the prerequisite ports    * an OpenBSD box to build the prerequisite ports
    * an Orange Pi PC2    * an Orange Pi PC2
-   * a USB-TTL serial cable +   * a USB-TTL serial cable like [[https://​www.adafruit.com/​product/​954|this]] 
-   * an appropriate 5V 3000A power adapter+   * an appropriate 5V 3000mA ​power adapter
    * a quality microSD card    * a quality microSD card
    * wired network access    * wired network access
Line 69: Line 69:
   * insert the microSD card   * insert the microSD card
  
-To console cable is connected on three pins residing on the top of the OPiPC2 board between the power input and the HDMI port. From left to right, the pins are labeled **GND** **RX** **TX**. Three connectors are used from the USB-TTL cable as follows:+The console cable is connected on three pins residing on the top of the OPiPC2 board between the power input and the HDMI port. From left to right, the pins are labeled **GND** **RX** **TX**. Three connectors are used from the USB-TTL cable as follows:
  
   * black is for GND or the ground   * black is for GND or the ground
Line 85: Line 85:
 An HDMI connection can be used, but most of the boot messages will not be displayed. An HDMI connection can be used, but most of the boot messages will not be displayed.
  
-The full boot sequence should scroll on the console screen, arriving at:+Insert the power adapter into the OPiPC2. ​The full boot sequence should scroll on the console screen, arriving at:
  
      ​bsd>​      ​bsd>​
  
 +After a few seconds, the bsd.rd RAM disk will boot, providing the standard OpenBSD bsd.rd menu.
en/openbsd_on_orangepi_pc2.txt · Last modified: 2018/02/02 20:35 by gman999